Trolley-Mounted Traffic Signals

The V-Touch Controller walks you through each step to ensure proper setup and programming.

Easy-to-Use Touchscreen

• Intuitive point-and-go icons 
• Real-time signal display
• Large 7 in. (178 mm) LCD color graphic touchscreen

Manage in a Few Clicks

• Easy pattern selection and configuration
• Create, modify and save your traffic patterns
• Schedule plans daily, weekly or monthly

Emergency Functionalities

• Instant emergency control (red/red function)
• Ability to send email/SMS alerts when something abnormal occurs

Any unit can be a primary or secondary unit. No need to move them around.

Our traffic signals can be equipped with two 12-volt batteries. The signal operates on one battery with an auxiliary battery backup.

Keep your signals running without interruption. The V-SWAP™ system automatically switches to the backup battery when voltage is low, allowing batteries to be removed and recharged without stopping the signals on an active job site.

Ensures secure communication between units.

The maximum distance between units is up to 1 mile (1.6 km) line of sight.

Our system monitors radio communication, conflicts, signal malfunction and low voltages.

Ability to create traffic plans for up to 4 units at a single intersection. Adapts to different project applications.

Equipped with a telescopic mast for quick and easy deployment.

No polluting fuel emissions or unpleasant engine noise emitted.

Increased Safety
The vehicle detection option increases work zone safety by automatically detecting vehicles and adjusting the green time. It is particularly useful when traffic is heavier on one side. 

Customizable
Parameters are customizable to fit any work zone construction length.
When vehicles are detected, the green light can stay active up to the maximum preprogrammed time set by the user. The operator programs the minimum and maximum time, and the desired length of time for the extension. 

Traffic signals can be programmed according to the time of day and rush hours.

How it Works
Vehicle detection is commonly used during rush hours. A green light can be programmed and 5 seconds can be added per detected car all the way up to the predetermined maximum time. 

No Unnecessary Waiting Time
Have you ever been stopped at a traffic light for several minutes waiting for the countdown and not seeing any cars coming the other way? Frustrating, right? Vehicle detection solves this issue by automatically turning the light to green when a car is detected. No more unnecessary waiting time.

Wireless Remote Control
The wireless remote control option allows you to control your units from up to 300 feet away. 

You can be positioned in a strategic location and control the units according to the situation. 

The remote control has three buttons which allow you to control two phases and full stop, where both units are red (all red). 

It is also possible to program your own phases too: 

1. One side red and the other green 
2. One side green and the other side red 
3. Both units are red and all traffic is stopped. 

Wired Remote Control
This option allows you to stand about 30 feet away from the unit, off from the road.

The remote control has three buttons which allow you to control two phases and full stop, where both units are red (all red). 

It is also possible to program your own phases too: 

1. One side red and the other green 
2. One side green and the other side red 
3. Both units are red and all traffic is stopped. 

Typical Application:
Two-way road with one lane closed for work. A worker decides when the lights are red and when they are green, and changes them manually.